Lumasense-technologies IN 2000 Manuel d'utilisateur télécharger pdf (Page 12)

IMPAC Infrared sensor IN 2000

8.4 The start menu

Opens a saved file

Storage of measured values for further processing

Online measurement with color bar display

Online measurement with graphic display

Setting of the parameters of the instrument

Setting of interface, baud rate or pyrometer addresses

Time interval between two measurements

Number of connected instruments (max. 2)

Listing of measured or stored values in tabular form

Processing of measured (stored) readings in graph form

Processing of measured (stored) readings in a text file

Calculation of spot sizes in various measuring distances

Only if available: controls the programmable controller PI 6000

8.5 Beginning

Before using the software, the serial interface connected to the pyrometer has to be selected under

the Computer icon. For two devices two PC interfaces must be used.

8.6 Number of devices

With a click on “number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices

are selected, always 2 windows are displayed for settings or evaluation.

8.7 Basic settings

Under pyrometer parameters all preset values

can be displayed and modified if necessary. A

changed value is entered immediately in the

pyrometer.

The window pyrometer parameters contain all parameter

settings described in 7, Parameter de

scriptions / set-

tings.

The open / save button enable to store

and recall own pyrometer configurations.

“1 meas.“ shows the current measuring

temperature in the pyrometer parameters

window for approx. 1 second.

“Print” prints this pyrometer parameters window.

With close the setting modus is quit, all displayed values

are already taken over in the pyrometer.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Pas de commentaire

Lumasense-technologies IN 2000 Manuel d'utilisateur Page 12