Lumasense-technologies IN 2000 Manuel d'utilisateur télécharger pdf (Page 5)

IMPAC Infrared sensor IN 2000

2 Overview

1 Instrument (stainless steel housing)

2 Connector for air purge hose

3 Optics

4 Fixing nuts

5 Type label

6 Electrical connector

2.1 Appropriate use

The IN

2000 is a stationary infrared measuring device for non-contact temperature measurements of non-

metallic surfaces or painted, coated or anodized metals between -32 and 900°C.

The IN 2000 is equipped with an analog 4 - 20 mA output for use as a standard 2 wire instrument, and a

digital output for connection to a PC using an optional available USB adapter. This allows the settings of the

available instrument parameters as well as displaying and storing of temperature measuring curves.

2.2 Scope of delivery

IN 2000, in

spection sheet, operation manual

3 Safety

3.1 General

Each pe

rson working with the pyrometer must have read and understood the user manual before operation.

Also this has to be done if the person already used similar instruments or was already trained by the manu-

facturer.

The pyrometer has only to be used for the purpose described in the manual. It is recommended to use only

accessories offered by the manufacturer.

3.2 Electrical connection

Follow co

mmon safety regulations for mains voltage (230 or 115 V AC) connecting additional devices operat-

ing with this mains voltage (e.g. transformers). Touching mains voltage can be fatal. An incorrect connection

and mounting can cause serious health or material damages.

Only qualified specialists are allowed to connect such devices to the mains voltage.

1 2 3 4 5 6 7 8 9 10 ... 35 36

Pas de commentaire

Lumasense-technologies IN 2000 Manuel d'utilisateur Page 5