Lumasense-technologies IGA 320/23 Manuel d'utilisateur télécharger pdf (Page 14)

IMPAC pyrometer IGA 320/23

7 Software InfraWin

Additionally to parameter adjustments the software InfraWin features the possibility of recording measure-

ment values inclusive displaying temperature measuring curves and subsequent analysis and storage.

This section gives an overview about the functions of the software. Additionally there is a software descrip-

tion in the program’s help menu.

The following descriptions refer to the program version 4.13. The latest version is available for free as

download from the homepage www.lumasenseinc.com.

7.1 Connecting the pyrometer to a PC

The p

rogram InfraWin can operate up to two devices. Two devices using RS485 may be operated simulta-

neously by the same interface, if two different addresses have been properly entered (see 6.14 Address).

7.2 Installation

For in

stallation select the setup program “setup.exe“ from the InfraWin-CD or from the downloaded and un-

packed zip file from the internet and follow the installation instructions.

7.3 Program start

After install

ation and the first program start a language must be chosen (German, English, French, Italian

and Spanish. The language also can be changed in the program). On the start page the screen shows the

following icons:

7.4 The start menu

Opens a saved file

Storage of measured values for further processing

Online measurement with color bar display

Online measurement with graphic display

Setting of the parameters of the instrument

Setting of interface, baud rate and pyrometer addresses (RS485)

Time interval between two measurements

Number of connected instruments (max. 2)

Listing of measured or stored values in tabular form

Processing of measured (stored) readings in graph form

Processing of measured (stored) readings in a text file

Calculation of spot sizes in various measuring distances

Only if available: controls the programmable controller PI 6000

7.5 Beginning

Before using the software, the serial interface connected to the pyrometer has to be selected under

the Computer icon. For two devices using the RS232 interface, two PC interfaces must be used.

7.6 Number of devices

With a click on “number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices

are selected, always 2 windows are displayed for settings or evaluation.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Pas de commentaire

Lumasense-technologies IGA 320/23 Manuel d'utilisateur Page 14