Lumasense-technologies Pearl Control Manuel d'utilisateur télécharger pdf (Page 11)

Pearl Control Software Manual Introduction  11

3. Set the maximum number of COM ports the ‘Scan’ feature will use.

To configure the COM settings:

1. Select COM Settings from the File Menu.

2. The COM Setup screen will appear. These settings control which COM port the camera is

connected on.

Note: If no COM ports are displayed, the program was unable to find an available

port. Check your camera connection and settings.

3. Set the COM # and Baudrate and click Use Settings.

Click Scan to have the software search for the camera. This may take up to a minute.

1.6.4 Connect a Camera or Core

1. Connect the RS232 cable to the camera.

COM # displays a

list of available

COM ports.

Baudrate for the

camera connection,

default is 115200.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Pas de commentaire

Lumasense-technologies Pearl Control Manuel d'utilisateur Page 11