IS 50-LO plus / IGA 50-LO plus Manual Introduction 10
IS 50-Al-LO plus:
narrow band in the near infrared
Photo current, digitized immediately
IS 50-Al-LO plus: Si
IGA 50-LO plus: InGaAs
24 V AC or DC (12 … 30 V AC or DC) (AC: 48 …
0 … 20 mA or 4 … 20 mA (linear), switchable; load: 0 … 500
Fixed 10 mA (for 0 … 20 mA analog output) or
fixed 12 mA (for 4 … 20 mA analog output)
dressable (half duplex), switchable, baud rate 1.2
up to 115 kBd
Analog output: < 0.1 % of the adjusted temperature range
Power supply, digital interface, analog output are galvanically
isolated against each other
Illuminated LC display for temperature indication or parameter
settings
Adjustable at the instrument or via serial interface: emissivity;
response time; analog output; address; baud rate; waiting time; °C or
°F; setting of the maximum value storage; temperature sub range
Emissivity :
20 … 100% adjustable inside the instrument or via interface in steps
of 0.1%
< 1 ms; adjustable to 0.01 s; 0.05 s; 0.25 s; 1 s; 3 s; 10 s
storage:
or double storage; cleared by: preselected time interval or
external deletion contact or via digital interface or automatically
with the next measuring object
o recognize a hot object in the measuring beam.
Contact switches if the measuring temperature is minimum 1% above
the beginning of the temperature range (only active with automatic
clearing or t
< 0.5 s))
Laser targeting light (class 2, max. power level
< 1 mW, = 630-680 nm)
( = 1, t
90
= 1 s, T
amb.
= 23 °C)
0.3% of reading in °C + 1 °C
Above 1500 °C: 0.5% of reading in °C
( = 1, t
= 1 s, T
= 23 °C)
IGA 50-LO plus:
IS 50-Si-LO plus;
IS 50-Al-LO plus:
on the converter, up to 250 °C on side
of fiber and optical head
20 ... 30 °C on the converter, up to 250 °C on
side of fiber and optical head
(The laser targeting light switches off automatically if the internal temperature of the
instrument goes above 55 °C, above 70 °C at the 4 ... 20 mA output a thermo switch
sets the analog output to 0 mA)
Commentaires sur ces manuels