Lumasense-technologies IN 6/78-L Manuel d'utilisateur télécharger pdf (Page 6)

IN 6/78-L Operating Manual General · 6

1.2.2 Electrical Connection

Follow common safety regulations for main voltage (230 or 115 V AC) when connecting

additional devices. Touching the main voltage can be fatal. An incorrect connection and/or

mountaing can cause serious health or material damages.

Only qualified specialists are allowed to connect such devices to the main voltage.

1.3 Limit of liability and warranty

All general information and notes for handling, maintenance and cleaning of this instrument

are offered according to the best of our knowledge and experience.

LumaSense Technologies is not liable for any damages that arise from the use of any examples

or processes mentioned in this manual or in case the content of this document should be

incomplete or incorrect. LumaSense Technologies reserves the right to revise this document and

to make changes from time to time in the content hereof without obligation to notify any

person or persons of such revisions or changes.

All Series 6 instruments from LumaSense Technologies have a regionally effective warranty

period. This warranty covers manufacturing defects and faults which arise during operation,

only if they are the result of defects caused by LumaSense Technologies.

Disassembly of the instrument is not allowed. The warranty is VOID if the instrument is

disassembled, tampered with, altered, or otherwise damaged without prior written consent

from LumaSense Technologies; or if considered by LumaSense Technologies to be abused or

used in abnormal conditions.

The Windows compatible software was thoroughly tested on a wide range of Windows

operating systems and in several world languages. Nevertheless, there is always a possibility that

a Windows or PC configuration or some other unforeseen condition exists that would cause the

software not to run smoothly. The manufacturer assumes no responsibility or liability and will

not guarantee the performance of the software. Liability regarding any direct or indirect

damage caused by this software is excluded.

1.4 Unpacking the Instrument

Before shipment, each instrument is assembled, calibrated, and tested at the LumaSense Factory.

When unpacking and inspecting your system components, you need to do the following:

1. Check all materials in the container against the enclosed packing list.

LumaSense Technologies cannot be responsible for shortages against the packing list

unless a claim is immediately filed with the carrier. Final claim and negotiations with the

carrier must be completed by the customer.

2. Carefully unpack and inspect all components for visible damage. If you note any damage

or suspect damage, immediately contact the carrier and LumaSense Technologies, Inc.

3. Save all packing materials, including the carrier’s identification codes, until you have

inspected all components and find that there is no obvious or hidden damage.

Note: LumaSense encourages you to register your product with us to receive updates,

product information, and special service offers:

http://info.lumasenseinc.com/registration.

1 2 3 4 5 6 7 8 9 10 11 ... 37 38

Pas de commentaire

Lumasense-technologies IN 6/78-L Manuel d'utilisateur Page 6