Lumasense-technologies IN 6/78-L Manuel d'utilisateur télécharger pdf (Page 23)

IN 6/78-L Operating Manual Software InfraWin · 23

Emi: AutoFind: If the true temperature of the measured object is known, you can calculate the

emissivity of the measured object using the Emi: AutoFind function:

A measured temperature is displayed with the

current set emissivity (in this example 100%) (here:

416.1 °C).

If you press Emi: Autofind a window will open

which allows you to enter the "true" temperature

(here 430 °C).

Once the temperature entry has been entered and

confirmed with Calculate, InfraWin will then

calculate the emissivity which occurs with the new

temperature (here 97.3%). This is displayed

immediately and can be used for further

temperature measurement.

5.5 Measurement online trend

The Measurement online

trend window displays:

· temperature as graphical diagram

· internal temperature of the instrument

· current temperature

· the quantity of the measured values

and file size of the current

measurement.

The example shows a sample reading over the

period of approximately 15 seconds with a

temperature range between 400 and 800 °C. The final temperature (at the end of the reading) is

431 °C.

The Mark Zone button allows you to color mark a temperature range for easier recognition.

The Threshold button allows you to set a temperature value as a baseline to prevent recording

values above or below the baseline temperature. This allows you to keep the output file size

small.

The Scaling Trend button allows you to scale temperature trend view.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Pas de commentaire

Lumasense-technologies IN 6/78-L Manuel d'utilisateur Page 23