Lumasense-technologies M330 Manuel d'utilisateur télécharger pdf (Page 29)

M330 Manual Service  29

To replace a heating element:

To replace a heater, both thermocouples must be moved out of the way of the heaters. Then

the top cover must be removed. Follow the steps below.

1. Disconnect all strap clamps from each heater. Remove straps and put aside.

2. Loosen both thermocouple clamps.

3. Pull each thermocouple at least ½ of the way out of the chamber.

4. Remove screws holding top cover.

1

2

3

3

Loosen t/c

clamps.

Pull thermocouple

out at least ½ way

to make room for

heater to pass by

Pull thermocouple

out at least ½ way

to make room for

heater to pass by

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Commentaires sur ces manuels

Pas de commentaire