Lumasense-technologies ISR 6 Advanced Manuel d'utilisateur télécharger pdf (Page 6)

ISR 6 Advanced Manual General Information · 6

The warranty is VOID if the instrument is disassembled, tampered with, altered, or otherwise

damaged without prior written consent from LumaSense Technologies; or if considered by

LumaSense Technologies to be abused or used in abnormal conditions.

The Windows compatible software was thoroughly tested on a wide range of Windows

operating systems and in several world languages. Nevertheless, there is always a possibility that

a Windows or PC configuration or some other unforeseen condition exists that would cause the

software not to run smoothly. The manufacturer assumes no responsibility or liability and will

not guarantee the performance of the software. Liability regarding any direct or indirect

damage caused by this software is excluded.

There are no user-serviceable components in the instrument

· Disassembly of the instrument is not allowed. The warranty is VOID if the instrument is

disassembled, tampered with, altered, or otherwise damaged without prior written

consent from LumaSense Technologies; or if considered by LumaSense Technologies to

be abused or used in abnormal conditions.

1.4 Unpacking the Instrument

Before shipment, each instrument is assembled, calibrated, and tested at the LumaSense Factory.

When unpacking and inspecting your system components, you need to do the following:

1. Check all materials in the container against the enclosed packing list.

LumaSense Technologies cannot be responsible for shortages against the packing list

unless a claim is immediately filed with the carrier. Final claim and negotiations with the

carrier must be completed by the customer.

2. Carefully unpack and inspect all components for visible damage. If you note any damage

or suspect damage, immediately contact the carrier and LumaSense Technologies, Inc.

3. Save all packing materials, including the carrier’s identification codes, until you have

inspected all components and find that there is no obvious or hidden damage.

Note: LumaSense encourages you to register your product with us to receive updates,

product information, and special service offers:

http://info.lumasenseinc.com/registration.

1.5 Service Request, Repair, or Support

Contact LumaSense Technologies Technical Support in case of a malfunction or service request.

Provide clearly stated details of the problem as well as the instrument model number and serial

number. Upon receipt of this information, Technical Support will attempt to locate the fault

and, if possible, solve the problem over the telephone.

If Technical Support concludes that the instrument must be returned to LumaSense Technologies

for repair, they will issue a Return Material Authorization (RMA) number.

Return the instrument upon receipt of the RMA number, transportation prepaid. Clearly

indicate the assigned RMA number on the shipping package exterior. Refer to Section 1.6,

Shipments to LumaSense for Repair, for shipping instructions.

1 2 3 4 5 6 7 8 9 10 11 ... 49 50

Pas de commentaire

Lumasense-technologies ISR 6 Advanced Manuel d'utilisateur Page 6