Lumasense-technologies LumaSHIELD Controller: Cleaning Probes and Connect Manuel d'utilisateur télécharger pdf

LumaSHIELD Guide: Cleaning Probes and Connectors

Purpose

To ensure reliable measurements and long life of the

probe and conditioner ﬁber optic connector, it is recom-

mended that the probe connector be wiped before and

after each connection. It is also recommended to clean

the conditioner connectors once in a while, depending on

instrument usage.

This document provides some guidelines for care and

cleaning of the ﬁber optic connectors.

Materials Needed

• Fiber optic connector cleaner

• Plastic foam swabs

• Methanol/ Isoproponol

• In-adaptor ferrule cleaner - 2.5mm

Cleaning the Probe Connector

Always clean the connector ferrule end face with the

included connector cleaner before each connection.

Failure to do so can result in permanent damage to the

connector caused by hard particles trapped between the

ﬁber optic end faces.

1. LumaSense recommends cleaning the connector via

the use or the Fiber Optic Connector Cleaner. Ensure

a new cleaning surface by advancing cloth tape and

tear off excess tape as required.

2. Softly press connector on a pristine portion of the

cloth tape and drag it across the tape while rotating

the connector. Up to 6 connectors may be cleaned

before advancing tape.

Cleaning the Conditioner

Connector

1. Provided in the cleaning kit, swab sticks are required

to insure a proper cleaning which are available at

most electronic stores. Avoid using cotton swabs.

Take a swab and wet it with a few drops of isopropa-

nol - avoid acetone.

2. In rotating motion, smoothly insert the swab in the

internal connector of your conditioner. Rotate the

swab gently in order to swamp the entire internal

connector surface. Repeat step #1 and 2, 3 times and

always use new swabs stick. To prevent scratches on

the connector, always use soft tip swab stick.

1 2

Résumé du contenu

Page 1 - Connector

LumaSHIELD Guide: Cleaning Probes and ConnectorsPurposeTo ensure reliable measurements and long life of the probe and conditioner ﬁber optic connector

Page 2 - Preventative Maintenance

Commentaires sur ces manuels

Pas de commentaire

Lumasense-technologies LumaSHIELD Controller: Cleaning Probes and Connect Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Lumasense-technologies LumaSHIELD Controller: Cleaning Probes and Connect. LumaSense Technologies LumaSHIELD Controller: Cleaning Probes and Connectors User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Lumasense-technologies LumaSHIELD Controller: Cleaning Probes and Connect